Help - Search - Members - Calendar
Full Version: Been Discussed But Was Posted Poorly - GMA900 - Kaly 10.5.1
InsanelyMac Forum > OSx86 Project > OSx86 Installation > OSx86 10.5 (Leopard)
T. Payne
XPS M140

Processor: Intel Pentium M 740 (1.73GHz) - 770 (2.13 GHz)
OS: NONE YET
Memory: 512MB SDRAM standard, expandable to 2GB
Hard Drive: 100GB
Optical Drive: CD/DVD Burner
Graphics: Intel Integrated Graphics Media Accelerator 900 - THIS HAS BEEN THE SOURCE OF MUCH GRIEF
Wireless: Intel PRO Wireless 2200 (802.11 b/g) or 2915 (802.11 a/b/g)XPS M140


OK this is what i gather:

My Processor would put me in the SSE2 Catagory
My Video Card makes me wanna jump off bridge
Dell Bios limits me from Editing bios to enable AHCI

I have DVD KALYWAY_LEO_10.5.1intel_SSE2_SSE3

*********************************************
This is what i have tried...:
F8:
vanilla -v ... vanilla -v -x -------Result, it reboots shortly after beginning to load
-s -------------- takes no to where i get a "SAM Multimedia: READ or WIRTE failed" blah blah and i get singleuserlogon -sh-3.2#: cant do {censored}
-v --------------- i get pretty far in then it hangs
-v -x ------------- i make it all the way to the OS X install screen and it hangs on the Choose Language Screen, I choose my lang click the button to move on and the cursor starts with the spinning and thats as far as i get

I have tried the Jumper trick and its not helped for me.

********************************************************

I realise there are already several posts on this forum with these types of questions... i have read them, tried their solutions, and nothing... with the screen hangsing here theres a few posts with this problem and no solution has been found... so I ask everyone to help me out here...

I tried to one pin jumper from 6 to 11
I did not try to 2 jumper
I do not have a external monitor to use so i need a work around

I am thinking that mabyee theres a way to start the kernal to work in SSE2mode only? But I just dont know how

Any and all Help would be Appreciated... Also be advised Again that i Have read all through this forum to try to find a solution myself and i have tried many of the answers I am sure come to your minds... Just wanted to throw that out there again


Here is a Pic of where it freezes on me.Click to view attachment
kamikaze
Dude I had the same problem and got tired.

I got my old SSE2 to a kid and bough myself a cheap MSI Wind. It's the best OSX laptop I ever had, it work 99%, it's light and cheap !
T. Payne
I got it finnaly...

I used: -v -x -f cpus=1
I also had the 1 wire jumper from 6 to 12

But now once inside OS X it wont do much of anything, when i try to preform an opperation it mostly stays on the beach ball of death
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.